XV-01 Pro with Lancia Delta Integrale + Novak Ballistic motor
The XV-01 Pro motor mount doesnt allow Novak's ballistic to seat properly.. the tabs come into contact with back side of mount.. here are before and after pictures:
Here are before and after picts of motor mount
dremeled off about 2 mm
Lancia Delta Body being prepped The DF03 version with pre-marked posts line perfectly up, no guess work
I have to say, the drive train on this car is really smooth! Nice to have a belt driven rallye car.
I set up the car as follows for now:
Front diff 5000 cs
Rear diff 1000 cs
Front dampers 50 weight, yellow spring (white with yellow mark)
rear dampers 35 weight, red springs
Front camber 0º
Front toe out 1º
Rear camber -2º
Rear toe: stock kit
Ride height, not set up yet.
Painted Lancia Delta Integrale with driver figures to boot
Bought one of these kits myslef have yet to build it but i plan on doing a review and possibly a build up thread.. only issue i see is getting a motor with long enough motor leads, the kit included one has long wires but many other cheaper brushless kits like hobby wing, inix, leopard have short wires.