Activity Stream

Perfect answers and very helpful links - thank you both gentlemen! Black bumpers and driver will be on the next order (Credit card has to cool off a...

Been waiting for a pile of parts...got all in but one. Bunch of aluminum goodies for the front and 2 set of Junfac shocks. Wahoo! Wild...

http://www.tamiyausa.com/articles/building-the-bruiser-by-joe-anderson-599?category_id=7&type=article

Like the clear sides, I planned on swapping out my metal ones with carbon fiber in time.

Two pieces of 1-1/2 x 1-1/2 x 1/8 inch ornamental aluminum angle were cut into 2-1/2 inch lengths. Trans mounts are trimmed to their final...

Welcome to the build. Thanks for checking it out Joe. Assembled the frame rails and sponsor plates using Tamiya Hop-Up Option (item#53021) 3mm...

Congrats on the big purchase. Let's see... the kit bumper trees are molded in White but Tamiya does offer them molded in Black (ITEM# 54415) as a...

Following this one!

Mocked-up the frame rails and transmission then took some measurements for some custom mounts. Purchased an 8 x 10 x .093 inch Lexan*...

Thanks. Traded a set of TXT-1 tires for those puppies... ! Built a pair of custom MIP AX-10 C-Drive Spline driveshafts using 6mm hubs from the...

Off to a great start! (Juggy tires - whoo-hoo!)

Continued from the previous post.

Customizing the TXT-2 AGRIOS (item #58549) Decided to build the new TXT-2 AGRIOS around a modified Traxxas E-Maxx 2-speed transmission capable of...

very nice projects so far, just had to catch up on threads I've missed lol!

lots of ways to mount bodies, velcro or magnets are very popular or if you still use posts but you want them less obvious you can use the rear facing...

Bought one of these kits myslef have yet to build it but i plan on doing a review and possibly a build up thread.. only issue i see is getting a...

My mistake; there is in fact a complete body set available with the re-release of the Jagermeister kit:...

eBay sell a decent kit for £30

True, but anyone who knows even a small amount about cars, knows what an E30 M3 is ;)

Put on a set of 2.2's and there was no way they were going to clear. So I narrowed out the wheelwells. Hacked off the rear of the wells. Kinda...

If you're into cars in anyway (1/10th or full scale) you will know what an E30 M3 is I hope :)

You know... most people don't know what an "e30" is. just sayin ;) haha..... I own one so no worries. a "complete" e30 body set is not available....

Well, I ordered bearings from Avid and have assembled the chassis. Just trying to figure up a mount so I don't have post holes coming through. Might...